How to configure EIGRP- Basics -- LAB

How to configure EIGRP- Basics -- LAB

Tasks to be completed...
1. Configure all IP addresses as specified in the topology.
2. Create 3 loopback interfaces:
Router A: 172.16.1.0 /24
Router B: 172.16.2.0 /24
Router C: 172.16.3.0 /24
3. Configure EIGRP on all routers, use AS number 1. Achieve full connectivity.
4. Make sure you ping all loopback interfaces.
5. Router C should use Router A to reach Router B's Loopback interface.
6. Change the metric on all routers, so that Load and Reliability will also be used.
7. Create a Authentication between Router B and Router C,

• Keychain : My-KeyChain
• Keyid : 1
• password : pgrspot

8. Check after configuring authentication, neighborship is again formed.

TOPOLOGY:

Solution Video:
How to configure EIGRP Basics -- LAB

If you have any questions kindly comment.....